Brighter pavers and joints packed with new sand
Paver Cleaning and Joint Sand in Arlington Hills, FL
Ring (904) 901-6561 for a free estimate on cleaning and re-sanding your Arlington Hills pavers.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can I get my pavers cleaned in Arlington Hills without a long wait?
A local contractor cleans pavers across Arlington Hills, FL, and you will hear back within 1 business day, usually much sooner. New joint sand is part of the job, and the free estimate comes with no pressure to book. To start, call (904) 901-6561.
Cleaning strips off the algae, rust and dirt that dull pavers, so the surface looks brighter and grips better underfoot. New sand is then swept into the joints, which steadies the pavers and crowds out weeds. The side walk that went dark over a damp summer can match the rest of the yard again. Point the contractor toward the ugliest patches when you send a quick request.
Paver Sealing Arlington Hills Is Proud to Serve Northeast Florida
- Brentwood
- Arlington
- Panama Park
- Fort Caroline
- Royal Terrace
- San Marco
- Southside
- Sandalwood
- Paxon
- Highlands
- Oceanway
- Riverside
- San Jose
- San Pablo
- Atlantic Beach
- Cedar Hills
- Beauclerc
- Dinsmore
- Jacksonville Beach
- Argyle Forest
- Mandarin
- Baymeadows
- Whitehouse
- Ponte Vedra Beach
- Bellair-Meadowbrook Terrace
- Palm Valley
- Yulee
- Fruit Cove
- Lakeside
What is part of a paver cleaning job?
A cleaning visit covers stain treatment, a gentle wash and joint sand after the surface dries. Book it by itself, or treat it as the first half of a sealing job. Shady walks and the ground around sprinkler heads usually eat up the most time. To line up a cleaning, call (904) 901-6561.
Stain treatment
A cleaner matched to the problem, whether algae, rust or oil, goes on first and is tested on a small spot.
Gentle wash
A rotary surface cleaner covers the ground evenly and does not blast the sand from the joints.
Fresh joint sand
Dry, clean sand is swept into every gap after the pavers dry, then settled in place.
Sealer if you want it
Sealing is the optional last stage, and it waits until the pavers are bone dry from edge to edge. The sealing guide covers what it adds.
What are the signs my pavers need cleaning?
Signs include a green or black film along shady edges, orange marks near sprinkler heads, weeds in the joints and sand on the drive after rain. Algae tops that list because a slippery walk or pool deck can cause a fall. To have yours looked at, call (904) 901-6561.
Is cleaning enough, or should I seal my pavers too?
Washing changes how pavers look this week, while a sealer coat decides how long the change holds. A wash alone costs less today, though algae, rust and fading come back on their own timetable. A coat also speeds up later washes, and it has to be renewed every few years. Say whether you want it when you send a quick request.
How often should Arlington Hills pavers be cleaned?
Once a year works for most houses, and Family Handyman likes spring for it. Shaded walks and pavers on the north and east sides of a house may need attention sooner than a sunny driveway. Call (904) 901-6561 to plan a schedule around your own yard.
Does a harder blast clean pavers better?
No. Western Interlock, a paver company, puts the right target near 1,500 PSI, and it says to use the widest wand or hold the tip at least 24 inches away. Family Handyman adds that spraying into the joints knocks the sand out. Ask for the PSI and the nozzle in advance when you send a quick request.
Technique counts as much as equipment. A surface cleaner held at one height leaves an even finish, and the right cleaner for each stain does the heavy lifting. Ask where the wash water runs, too, since a third of the ZIP code is water. To raise those questions now, call (904) 901-6561.
What is the orange staining near my sprinklers?
Most often it is iron. Safe Touch says iron in well water and reclaimed irrigation leaves orange rust on concrete, garage doors and stucco, and more pressure makes it worse. A rust remover made for pavers lifts the marks, and they must be gone before sealer goes down. Point out the marks when you send a quick request.
Why are white patches showing on newer pavers?
White chalky haze on newer pavers is most likely efflorescence, which is salt moving up out of the concrete. Unilock says it typically fades in two to three months and can take up to a year, and sealing has to wait until it is gone. Clouded old sealer can look much the same. Show the contractor where it is when you call (904) 901-6561.
Which paved areas can be cleaned at an Arlington Hills home?
Any paved spot around the house can be washed, whether it is the driveway, the pool deck, the patio or the front walk. Different areas collect different grime, so the cleaner and the method change too. To start with yours, send a quick request.
Driveways
Tires, oil drips and afternoon sun all hit the driveway first. Cleaning here keeps the color even where cars turn and the joints loosen.
Pool decks and lanais
Splash water, chlorine and bare wet feet wear a pool deck every day. Cleaning a pool deck should leave a surface that does not turn slick.
Patios
A shaded back patio stays damp longer, so green growth settles in early. Cleaning a patio puts most of the effort into those shady spots.
Front walks and entries
An entry walk collects mulch, soil and drips from potted plants. Cleaning the front walk is a small job, and it is the first thing a guest sees.
What leaves Arlington Hills pavers dirty?
Salt and sun, storm sand loss, damp shade, sprinkler rust and failing sealer lead the list. A cleaning handles several of them, and sealing or repairs deal with the rest. Call (904) 901-6561 to see which of these apply to your house.
1. Fading and salt wear
Sun pulls the color out of bare pavers. A paver company that works between the Intracoastal Waterway and the river says salt air and sun wear color and sealer down faster there than farther inland.
2. Joint sand lost to storms
Safe Touch says summer storms pull sand out of driveways and pool decks, and a wash shows how much is left. Another local company adds that sandy ground and heavy rain make driveway aprons the first spot to give out.
3. Green growth where it stays damp
Duval County has a humid subtropical climate, and Safe Touch notes that moisture lingers on the north and east sides of a house. Walkways on those sides stay green the longest.
4. Orange marks from sprinklers
Iron in well water or reclaimed irrigation leaves orange rust, Safe Touch explains, and more pressure makes it worse. The marks need a rust treatment before any coat goes on.
5. Cloudy or peeling old sealer
Stallone's Pro Wash says old, peeling sealer has to be stripped before a new coat, since sealing over it traps the problem. A Northeast Florida price guide puts stripping at $0.75 to $1.50 per square foot.
What does paver cleaning cost in Arlington Hills?
Companies here often price the full clean, sand and seal together, and one Northeast Florida washing company publishes $1.75 to $3.25 per square foot for it. Square footage, paver type and whether joint sand is needed set the final number, and a Northeast Florida price guide lists new joint sand at $0.25 to $0.75 per square foot. For a price on your property, send a quick request.
Planning to seal as well? Ask for one combined price, and ask what a wash by itself would cost so you can compare. To go over the two with a person, call (904) 901-6561.
Thinking about protection as well? Read about sealing your pavers, or look over the communities served and return to paver sealing in Arlington Hills.
| Paved area | New joint sand adds | Full clean, sand and seal |
|---|---|---|
| 300 sq ft | $75 to $225 | $525 to $975 |
| 600 sq ft | $150 to $450 | $1,050 to $1,950 |
| 1,000 sq ft | $250 to $750 | $1,750 to $3,250 |
The last column multiplies the $1.75 to $3.25 per square foot that Safe Touch publishes. The middle column uses the $0.25 to $0.75 per square foot a Northeast Florida price guide gives for new joint sand. The contractor names the real price after looking at the surface in person.
Why use a contractor who works east of the river for paver cleaning?
A contractor who works around Arlington Hills knows what damp shade, sprinkler iron and storm runoff leave behind. Compare the quote with the published rates on this page, then take as long as you like to decide. To begin, send a quick request.
Contractors who know this ground
A contractor who works east of the river already plans for damp air, sandy ground and summer downpours. That makes the first visit more useful.
A free look, your decision
The estimate is free and you are free to say no. Any price is agreed directly with the contractor.
Rates to check against
Companies across Northeast Florida publish their per square foot prices, and the range on this site comes from them. A bid that lands well outside it is worth a follow up question.
Your own pace
Have the number written down before you agree to anything. The contractor standards page lists what to confirm before you sign anything.
Want a free estimate to clean your Arlington Hills pavers?
Use the short form or ring, and a contractor writes back within 1 business day, usually much sooner.
Free, no obligation
What do cleaned pavers look like around Arlington Hills?
How does the paver cleaning process go, step by step?
Leave the sealer out and the contractor finishes after step four, once the joints are topped off. To set a date, call (904) 901-6561.
1. Measure and look it over
For the cleaning quote, the contractor first measures the paved area. They note sunken pavers, old sealer, rust marks and any spot where water sits.
2. Cover and wash
Plants and outlets get covered and the sprinklers go off. A rotary surface cleaner washes the pavers at a steady height, so the joint sand stays put.
3. Treat the stains
Algae, rust and oil each get a cleaner made for that stain. It goes on a small test spot first.
4. Refill the joints
After the pavers dry, kiln dried joint sand is swept in, settled and topped off. The extra is blown clear.
5. Seal and walk the job
If sealer is part of the job, a pump sprayer lays it down and a roller smooths it out. Last, the contractor walks the finished area with you and says how long feet and cars need to stay off.
Frequently Asked Questions
Is it a good idea to pressure wash pavers?
Yes, as long as the pressure stays moderate and the joints are re-sanded afterward. Western Interlock, a paver company, puts the target near 1,500 PSI and warns that moving too fast leaves swirl marks. Safe Touch adds that more pressure makes rust stains worse.
Will Dawn dish soap clean pavers?
For light dirt, yes. Family Handyman suggests mixing Dawn into a bucket of water, scrubbing with a stiff brush and rinsing with a hose. Deep green growth, rust and oil need a cleaner made for them.
Can I pressure wash brick pavers?
Yes, with care. Family Handyman starts with a 40 degree white nozzle and tests a corner first. If that causes marks, the pavers are too soft for a pressure washer and should be hand washed. Spraying straight into the joints knocks the sand out.
How can I remove stains from my pavers?
Match the cleaner to the stain. Orange marks from sprinklers are iron, and Safe Touch says they need a rust treatment, not more pressure. Oil and grease need a dedicated paver cleaner, according to Unilock, and sealing over a stain makes it more visible.
Should pavers be cleaned before sealing?
Yes. Unilock says anything left on the surface is locked in under the sealer, so dirt, algae and stains have to come off first. The pavers then need to dry fully.
How long do pavers need to dry before sealing?
Unilock says a few hours in warm sun or about 24 hours in cool shade. Damp pavers can leave the sealer milky, which is why the wash and the coat are often split across two days.
Why do my pavers keep turning green in Arlington Hills?
Damp shade is the cause. Duval County is humid subtropical, and Safe Touch says moisture lingers on the north and east sides of a house. Trimming back shade and aiming sprinklers away from the pavers helps, and sealing can make the surface easier to rinse.
How much does paver cleaning cost in Arlington Hills?
Companies here often price the full clean, sand and seal together, at $1.75 to $3.25 per square foot by one Northeast Florida washing company. A Northeast Florida price guide lists new joint sand at $0.25 to $0.75 per square foot on top. Ask for the wash and the sand as separate lines if you want to compare.
Time to clean up those Arlington Hills pavers?
Tell a local contractor where the green and the rust are, and a reply comes within 1 business day, usually much sooner.
Free, no obligation