Paver sealing for Highlands homes
Paver Sealing in Highlands, FL
A local contractor can bring faded, green Highlands pavers back to one even color, so call (904) 901-6561.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Highlands
Paver sealing is available in Highlands, a wide stretch of north Jacksonville that runs from the Trout River toward the airport. The job covers cleaning, re-sanding and sealing a driveway, walkway, patio or pool deck, all done by a local contractor, and the estimate is free. Send a request through the link to send a quick request, and you will hear back within 1 business day, usually much sooner. The contractor will ask which part of the ZIP you are in, since it covers about 97 square miles.
Highlands is big, so first tell the contractor where your street is. Then describe what the pavers look like now. Maybe the color has faded, the joints have gone green or the sand has washed into the street. Whatever it is, call (904) 901-6561 and hear what cleaning and resealing would do for it.
Why hire a local paver sealing contractor in Highlands?
Highlands covers a large area, from older streets to newer blocks near First Coast High. A local contractor who knows the area can match the job to your street, so send a quick request.
A visit before any price
A contractor comes out, measures and writes you a number. You pay nothing to find out what the job costs.
A published range to check
The published range here is $1.75 to $3.25 per square foot for cleaning, sanding and sealing. Hold any Highlands bid up to it. The quote should list the area and the rate.
A match for your finish
Choose matte for a natural look or a wet look for more shine, though wet look also scuffs sooner.
No strings attached
You pick the day, and you can say no after the quote.
Get Your Free Estimate in Highlands
Tell us about your pavers in Highlands.
Free, no obligation
What paver problems show up most in Highlands?
Sandy ground that drains joint sand
The USDA describes the Mandarin soil series, first set up in Duval County, as deep fine sand with a water table that sits 18 to 42 inches down. Rain totals roughly 52 inches in a Jacksonville year, and much of the summer share comes in short downpours. Rain moves through sand fast and carries joint sand along. Open joints then take in soil, weeds and ants. A fresh fill of sand and a coat of sealer slow that loss, though a hard storm can still move some sand. The ZIP covers about 97 square miles, so soil and shade differ more here than in a compact neighborhood.
Green growth on the north side
A Florida city page says green algae grows where shade and moisture meet, such as the north side of buildings and under trees or patio roofs. Any Highlands lot with tall trees or a covered porch fits that description. The growth looks like a stain, but sealer cannot cover it, so it must be washed away first. If the same corner turns green every year, say so at the visit, since that spot may need a second wash and a longer dry time.
Heat that fades color
Jacksonville's July highs average about 92 degrees, and a driveway in full sun takes the brunt. A Jacksonville paver company says driveways in full sun need a new coat about every 18 to 24 months. A shaded walk with light use can go longer. A chalky or faded surface tells you the coat is thin, and a fresh one can bring some of the color back.
Pavers older than the house's owners
Median build years for Highlands areas run from 1953 to 1957, so many houses have had several owners. Any of them could have sealed the pavers with something unknown, and solvent-based sealer left behind blocks a water-based product. The contractor needs to test what is there before picking one. A patchy, flaking or sticky feel is a clue, and a receipt from the last job helps even more. Zoned schools like Garden City Elementary and Highlands Middle serve many of these homes, and most were built in the 1950s.
Low spots and sunken joints
A Jacksonville paver company says sunken or lifted sections should be reset before sealing, because sealer keeps any dip it covers. Root lift near a big tree and washed-out base near a downspout are common causes. Sealing helps stop new sand loss, but it cannot lift a low paver. Point out dips at the first visit, and ask whether the base repair will show up as its own line on the quote.
Does Highlands have one kind of home, or many?
Many, because the ZIP covers about 97 square miles and holds over 28,000 housing units. A real estate page for East Highlands lists homes built from 1946 to 2022, with a median year of 1957, and another small area counts 71 homes built from 1953 to 1970. Those homes run about 1,448 square feet each. Say which part of the ZIP is yours when you send a quick request.
Streets named in those listings include Monaco Drive, De Paul Drive, Pheasant Drive, Tulsa Road and Loyola Drive North. Zoned schools there include Garden City Elementary, Highlands Middle and First Coast High. Roughly two of every three occupied homes in the ZIP are owner-occupied, so the person booking the job is usually the one living there. Call (904) 901-6561 to talk through your street, or send a photo.
An HOA can weigh in on pavers only if its declaration or published guidelines cover them, and Florida law makes it apply its rules to every owner. A sealer change may or may not be covered, so read your documents. Then send a quick request with the finish you have in mind. A short note from the board settles most questions before the work is booked.
What does paver sealing cost in Highlands?
The usual published range for this work is $1.75 to $3.25 per square foot, which covers cleaning, sanding and sealing. The price moves with total area, stains, and whether an old coat has to be stripped. Wide driveways add up fast even at a fair rate, and bigger jobs often get a better one, so ask for the measured area. To get your number, send a quick request.
Distance and access can matter in a ZIP this large. A gated yard, a locked side path or a long run of steps all add prep time, as does a tight spot beside the garage. On the phone at (904) 901-6561, mention them, since a photo of the path or gate helps. If you need one lane open, ask about doing the job in sections.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $525 to $975 |
| 600 sq ft | Two car driveway | $1,050 to $1,950 |
| 1,000 sq ft | Large driveway or pool deck | $1,750 to $3,250 |
| 1,500 sq ft | Driveway plus pool deck | $2,625 to $4,875 |
Math based on the $1.75 to $3.25 per square foot that Northeast Florida paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.
How does a paver sealing job work in Highlands?
Meet at the pavers and measure
The contractor walks the driveway, the walk and any patio, and measures each. Low or root-lifted spots are flagged and fixed before any coat goes on. If there is old sealer, it gets tested so the right product can be chosen. The plan and the price are explained on the spot. Gate codes, pets and where to park are worth a mention. Because Highlands lots vary so much, the visit covers shade, slope and drainage as well as the surface.
Wash with care
Pavers are washed at the lowest pressure that works, with a wide fan tip angled across the surface. Strong pressure aimed into the joints can strip the sand and cause uneven settling. Oil, rust and green film get treated ahead of time. Beds and pool edges are shielded from the rinse where possible. A few deep stains may fade without vanishing, and the contractor says so up front. Wide aprons are washed in sections so the whole drive dries evenly.
Put the joint sand back
Fresh sand goes in once the washing has pulled the old sand out. On the sandy ground of north Duval County, full joints keep soil and weeds from getting a start. The contractor sweeps until the joints are tight. Tinted joint sand is available if you want it, and some jobs charge extra for it. The sand is swept in a few passes, since wide joints take more of it.
Check that it is dry
A damp corner the eye misses is how a cloudy patch starts, so the contractor touches the surface before spraying. Sealer laid on damp stone can go white or hazy. Several makers want a full day of dry time first. Shade slows the dry-out, so a Highlands walk under trees waits longer than the open drive.
Seal, back-roll and keep off
Sealer is sprayed and back-rolled for an even coat. People can usually step on it again in a few hours. Cars stay off for about a day, and the sprinklers should not hit the pavers until the coat cures. If rain moves in that day, the contractor will tell you whether to expect a new date. For a wide driveway, ask whether the job can be done in sections so one lane stays open. Foot traffic from the mailbox to the door is fine by afternoon, but keep wheels off the pavers until the next day.
Complete paver services in Highlands
A Highlands job follows the same order every time: wash, fresh joint sand, a dry-out and then sealer. Sealer goes on with a sprayer and a roller, which pushes it into the joints, and the whole job often fits in one day. Wide driveways may take a full day by themselves. For the timing of each stage on your drive, call (904) 901-6561.
Highlands driveways are often wide, and many lots also have a front walk and a back patio. Each surface is measured, and a bigger total can bring a better rate. A pool deck usually gets a sealer that does not leave a slick film, since film-forming products can make a deck slippery. To list the surfaces on your lot, send a quick request.
The base is either water or solvent, and the sheen is matte or wet look. A water-based coat cannot go over a solvent-based one, so the old coat decides first. Wet look shows scuffs sooner than matte, so ask the contractor to write down the product name for your records. Call (904) 901-6561 if you want help picking.
Rain sets the calendar. A fresh coat needs dry pavers and about a day without rain to cure, and Jacksonville's wettest months run from May to September. Sealer sprayed ahead of a downpour can turn cloudy, so contractors check the forecast. To find an open date, send a quick request.
Questions to ask before you hire
- Where does the sealer go if it drips onto my shrubs or into the pool?
- Is refilling the joint sand after the wash part of the price?
- Who decides when the surface has rested long enough after the wash for sealing to begin?
- Do you wash the whole area the same way, or scrub the stained spots by hand?
- Will I see the measured area and the rate on the quote before I agree?
- Is a weed killer used in the seams, and is it safe for my dog?
- Does the sealing come with a written warranty, and who stands behind it?
What do sealed pavers look like around Highlands?
Why local matters in Highlands
A contractor who works Highlands knows how large the area is and how different the streets are. Homes from the 1950s sit in the same ZIP as newer builds, and the pavers on each need a different first question. Is the coat old, is the sand gone, is the base sound? Dial (904) 901-6561 and ask.
Weather and water are part of local know-how, too. The Trout River's lower stretch is brackish and runs through the Northside, and summer rain falls fast. A local contractor picks a sealing day with that in mind and keeps a spare day open. To ask how a rain day would be handled, send a quick request.
The nearby landmarks are a help for directions. Highlands Regional Library, Ray Greene Park and the Jacksonville Zoo and Gardens are all in the Highlands area. A contractor who knows the area finds your street without a long phone call. When you are ready, send a quick request and give the nearest landmark.
What are the landmarks that define Highlands?
Highlands Regional Library sits at 1826 Dunn Avenue, with an auditorium and study rooms. Ray Greene Park on Leonid Road opened in 1957 and grew by 30 acres in the late 1970s. It is named for C. Ray Greene Sr., a county commissioner who ran the Brentwood Pharmacy, so call (904) 901-6561 if you live near the park.
The Jacksonville Zoo and Gardens sits on 122 acres at the mouth of the Trout River, and it opened in 1914. Jacksonville International Airport, 13 miles north of downtown, opened in 1968 along Lem Turner Road. The Northside, which holds Highlands, became part of the city in the 1968 consolidation. Wherever you are in that area, send a quick request and name your cross streets.
Frequently Asked Questions
How much does it cost to seal outdoor pavers in Highlands?
Published prices for the work run $1.75 to $3.25 per square foot, and that one number covers the wash, the new sand and the coat of sealer. A wide Highlands driveway adds up quickly, so get the square footage and the rate in writing. A small walk can cost more per foot. Bigger driveways are quoted by area, so the number scales with the size of your drive.
How long does a sealed driveway last in Highlands?
Quotes put the span between coats at two to five years. In Highlands, a driveway in full sun usually needs its coat renewed sooner, and a shaded walk can go longer. One Jacksonville company puts shaded walks with light use at 24 to 36 months. Water that stops beading on the surface is the sign a new coat is due.
Is sealing worth doing on Florida pavers?
Mostly yes. For a driveway or patio, sealing keeps joint sand from washing out, which slows weeds and ants, and it shields color from the sun. It does need a fresh coat later, and Highlands heat makes that day arrive sooner on open drives. Shaded walks tend to go longer between coats than open drives.
Can I clean, sand and seal my pavers in Highlands in one visit?
A local contractor does all three as one job. Washing removes joint sand, so fresh sand goes in before the sealer, and sealing comes last once the surface is dry. A typical driveway takes about a day, and cars should stay off it for a day after. Ask for the order of work in writing.
Is it better to spray or roll paver sealer?
In practice, pros use both tools. They spray the sealer and then back-roll it so it reaches into the joints. Spraying alone can over-apply, and rolling alone can leave lap marks. Left to dry, extra sealer can turn cloudy, which is why the roller matters.
How long should I stay off pavers after sealing in Highlands?
After a few hours, you can walk on it. Keep cars off the driveway for roughly a day, since conditions on the day set the exact time. Keep sprinklers off the pavers until the sealer cures. Parking on the street for the day makes scheduling easier.
Do I need HOA approval to seal pavers in Highlands?
It depends on the rules your HOA has put in writing. Under Florida law, an HOA can enforce only what those documents say, and it has to apply the rules to every owner. A natural-look finish is less likely to raise questions than a high gloss. Ask the board for a short written note if your documents are silent.
What if my Highlands driveway has sunken pavers?
Those need repair before sealing, since a coat of sealer keeps any dip it covers. The contractor resets low or lifted sections on a repaired base. Mention any dips when the contractor first walks your yard. The base repair is a separate line from the sealing.
Nearby areas we serve
Ready for a Free Estimate in Highlands?
Call (904) 901-6561 and tell us about your pavers.
Free, no obligation